登录 | 注册
产品中心
首页 > 产品中心 > Aluminum and aluminum alloy Surface handle series > Alkali etching agent(liquid)

Alkali etching agent(liquid)

Product features:

    This product is a kind of pale yellow liquid prepared with multiple complexing agent,inhibitor, bright regulator, detergent, surface activator and so on. Compared with conventional Alkali etching agent, it has the following advantages:

1) It is prepared by considering long life of alkali tank liquid and aluminum material extrusion trace finishing effect. New WF-B1-01 can be used for production of bright finishing agent and sand finishing agent.

2) It has stronger aluminum ion complexing capacity and no settlement occurs when it reaches 140 g/L.

3) It adopts suitable surface activator, inhibitor and make aluminum profile easy for dripping and finer grain size when it leaves alkali etching tank.

4) The tank liquid process is easy to control with low aluminum consumption and   easy maintenance and management.

2. Tank composition:

            HA—05                    20~25 g/L

Sodium hydroxide            40~60 g/L
3. Technical parameters:

Temperature           50~70℃(optimal 55~65)
  Time             1~25min(depends on temperature, aluminum   ion content, surface  state and surface lustre requirement)
4. Consumption parameters:

Common bright finishing material:    

Sodium hydroxide:   10~15kg/T
WF-B1-01:          2~3kg/T

Alkali etching sand finishing material:

Sodium hydroxide:   35~50kg/T
WF-B1-01:           5~7kg/T

5. Packing and storage:

 This product is packed with 30kg air-tight plastic barrels.


An aluminum profile can leave the etching tank looking evenly matte and still show streaks after anodizing. We approach that problem by looking at the whole preparation process: incoming material, cleaning, bath condition, handling, and the final finish. Our Alkali etching agent(liquid) product category supports the selection of a suitable liquid alkaline treatment for aluminum. We define the grade and operating method around your material and production requirements.

1. What We Want the Etching Stage to Achieve

When you ask us for an aluminum etching agent, we first discuss the surface you want to produce. A soft decorative matte finish, light surface preparation, and heavier removal of superficial marks are different jobs. They can require different treatment conditions and different acceptance checks.

alkaline etching deliberately removes aluminum from the surface. That distinguishes it from a cleaner intended to remove oil with little surface attack. Some formulated products combine cleaning and etching, but we confirm that function for the selected grade instead of assuming that every alkaline liquid does both.

We use the name Alkali etching agent(liquid) on this product page. You may also see Liquid alkaline etching agent, aluminum alkali etchant, or liquid aluminum etching additive used in technical discussions. These names describe related product categories, but they do not establish the same composition or working-bath preparation.

The supplied product might be a formulated etchant or an additive used with a separately controlled alkaline bath. We establish that distinction before discussing concentration. Otherwise, a percentage intended for an additive could be mistaken for the strength of the complete working solution.

We also agree where appearance will be judged. For parts that will be anodized and colored, the final customer sees the completed finish rather than the intermediate etched metal. Sample approval should therefore cover the relevant later stages as well as the surface leaving the etch tank.

Our first questions concern alloy designation, material condition, part geometry, existing preparation, target appearance, and production equipment. An approved reference sample is useful, especially where words such as satin or matte mean different things to different people.

We aim to define a process that produces the required surface with controlled material removal. More aggressive etching is not automatically an improvement. It can increase metal loss or change details that need to remain within the part specification.

2. How Alkaline Etching Changes the Aluminum Surface

In a typical sodium-hydroxide-based process, the alkaline solution attacks the surface oxide and then dissolves aluminum. Dissolved aluminum becomes part of the bath chemistry. As treatment continues, the working solution changes, even when its liquid level looks much the same.

The reaction changes the fine surface texture. Depending on the alloy, starting surface, formulation, and operating conditions, this can create the diffuse reflection associated with a matte appearance. We evaluate the result on representative material because different aluminum surfaces do not react identically.

Alloy constituents and other surface material may leave a residue after etching. This is often called smut. A suitable subsequent desmutting stage may be needed before anodizing. We confirm the complete sequence for the actual alloy rather than treat an etched appearance as proof that the surface is ready for every next operation.

Temperature, available alkali, dissolved aluminum, additive condition, and contact time all influence the process. Part loading and movement of solution around the surface also matter. We control these factors together so that a change in appearance can be traced to a useful cause.

What etching can and cannot correct

Alkaline etching can reduce the visibility of some superficial features, but we do not treat it as a repair method for every scratch, dent, or extrusion defect. Deep or inconsistent damage may need a separate decision before treatment. Increasing etch time can remove more sound material without making the original defect acceptable.

We pay attention to narrow details, thin walls, mating surfaces, and sharp edges where material removal matters. A satisfactory decorative face does not establish that the whole part remains dimensionally suitable. Those requirements belong in the trial plan.

Caustic attack on aluminum can release hydrogen. We therefore consider ventilation and ignition control as part of the approved installation and handling method, together with the product's safety data sheet. This reaction is described in the ILO/WHO International Chemical Safety Card for sodium hydroxide; it is not a property eliminated simply by supplying an etching product in liquid form.

3. Why We Evaluate a Liquid Product for the Line

A liquid supply form can suit metered transfer and dosing arrangements. It may also remove the need to handle a particular powdered additive at the point of use. We assess those practical advantages against the actual formulation and equipment rather than assume that liquid form guarantees easier operation.

Pumps, seals, hoses, storage containers, and tank materials must suit the product. Dosing also needs a defined basis. A volume measurement and a mass measurement are not interchangeable unless the relevant density and conditions are known.

We confirm whether the product needs dilution, separate alkali, additional components, or a specific bath make-up procedure. A liquid additive is not automatically a ready-to-use etching bath. Its technical information must identify what is supplied and how the working solution is prepared.

Published examples showing different product roles

The figures below belong to external reference products. They help explain why a formulation's role and concentration basis must be understood before comparing operating windows. They are not Huaao specifications, mixing instructions, or a performance ranking.

Published Reference ProductPublished RolePublished ConcentrationPublished TemperaturePublished Contact Time
SurTec 181Highly alkaline liquid for aluminum etching.2–7% by volume40–90°C0.5–10 minutes
BONDERITE C-AK A46Liquid alkaline etching additive for an aluminum matte finish.1–2%; percentage basis not stated in the brochure40–70°CNot stated in the cited brochure

Sources: SurTec 181 Aluminiumbeize technical information, Surtec Suisse, November 2, 2020; Henkel Japan, Anodizing Agents product brochure, July 2024, page 2. These are published reference conditions. Confirm current product instructions before using either external grade.

We preserve the units as published. We do not convert an unspecified percentage into a volume or mass percentage. Nor do we treat an additive's listed concentration as a complete description of the bath in which it is used.

The benefits we want to establish

For our selected liquid alkali etching grade, we focus on repeatable surface development, a workable analytical method, and practical replenishment. We also evaluate how the product fits existing cleaning, rinsing, desmutting, and anodizing stages.

Where longer bath service, reduced scale, lower consumption, or less metal loss is a project goal, we agree how it will be measured. Those outcomes depend on the formulation and operating conditions. We do not attach a fixed bath life or saving percentage to an application that has not been evaluated.

Liquid form supports a handling choice; the grade's chemistry and process evidence establish its technical suitability. We keep both parts of that decision visible when discussing a replacement or a new line.

4. Keeping the Etching Bath Under Control

A working bath receives aluminum as parts are processed and loses liquid through drag-out. Drag-out means solution that leaves the tank on the parts and racks. The bath may also receive water and contamination from earlier stages. We therefore assess it as a changing solution, with defined sampling and replenishment instructions.

A pH reading alone cannot describe all of those changes. We need to understand which chemical values are relevant to the selected formulation and how they are measured. An analytical result is useful only when the sampling, method, units, and calculation are clear.

Comparing the main control questions

Control ItemQuestion It Helps AnswerWhat It Does Not Establish Alone
Available or free alkaliIs the active alkaline condition within the grade's agreed working range?Dissolved aluminum, additive condition, or final surface acceptance.
Dissolved aluminumHow has aluminum loading changed as the bath is used?The required replenishment decision without the other bath information.
Product or additive controlIs the relevant formulation component controlled by its prescribed method?The condition of every other bath component.
Temperature and contact timeWhat physical treatment conditions did the load experience?Cleaning quality, bath chemistry, or acceptable metal removal.

Sources: SurTec 181 technical information, Maintenance and Analysis; U.S. Specialty Color Corporation, Specialty 835 Etch technical data, revised July 26, 2023. The table is our interpretation of process-control functions, not a shared analytical procedure or a set of universal limits.

Free alkali, total alkalinity, and product concentration must not be treated as different names for the same result. Supplier methods can use different endpoints and corrections. We follow the selected grade's method rather than transfer a calculation factor from another etching chemical.

We take representative samples from the location and under the conditions stated in the method. The reported result should identify the bath, sample time, preparation, units, and any replenishment already made. Otherwise, a later comparison may confuse a sampling change with a real process change.

We also distinguish a heater setting from the temperature around a production load. Incoming material, tank circulation, and sensor position can affect that relationship. Where appearance varies across a load, we inspect the physical arrangement as well as the chemical analysis.

If deposits form on equipment, we investigate the bath condition and maintenance arrangement. We do not assume that another dose of additive will resolve every scale or sludge problem. The selected formulation determines which changes are appropriate.

A useful record connects bath analysis, additions, loading, temperature, time, and surface results. We use that connection to understand a change before extending treatment or increasing consumption.

A trial on a freshly prepared bath is only one part of qualification. We also agree how to assess the process after representative production loading, within the selected grade's limits. We check whether appearance and removal remain acceptable as normal use changes the solution. Recording material and loading history helps us interpret those results. A good sample from a new bath does not establish an unlimited service life.

5. Checking Matte Appearance and Material Removal

We agree the appearance check before approving a trial. Lighting, viewing direction, reference samples, and the stage of inspection should be consistent. If the product is intended for anodized profiles, we include the completed anodized surface in the evaluation.

Where measurements are useful, we select a suitable gloss or surface-texture method. The instrument, measurement direction, sampling locations, and acceptance criteria need to be recorded. One favorable reading on a small area does not establish uniformity along a whole profile.

We check material removal separately. Appearance and metal loss answer different questions. A surface can become more matte while an important dimension changes too far, or it can lose material without developing the required texture.

Comparing mass loss with equivalent average thickness

The following calculation uses a nominal density of 2.70 g/cm³ for alloy 6063. We divide metal mass loss by the total exposed area and density to estimate equivalent average removal. The selected mass-loss values are illustrative inputs, not test results or recommended etching targets.

Illustrative Metal Loss per Total Exposed AreaDensity UsedCalculated Equivalent Average Removal
2.7 g/m²2.70 g/cm³1.0 µm
5.4 g/m²2.70 g/cm³2.0 µm
13.5 g/m²2.70 g/cm³5.0 µm

Source and calculation basis: The Aluminum Association, International Alloy Designations and Chemical Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys, December 2025, calculated nominal density table, alloy 6063. We calculated thickness from mass divided by density and exposed area. The results assume metal-only loss and do not describe local attack or guarantee uniform removal.

For practical weighing, we need a defined preparation and measurement method. Oil, moisture, loose residue, or additional metal removal in another stage can affect the measured difference. The record should identify what was weighed and which operations occurred between measurements.

Exposed area must include the surfaces actually treated. A sheet etched on both sides cannot be evaluated using only its front-face area without adjusting the calculation. Profile cavities and complex geometry also need careful treatment when establishing the area basis.

Average removal does not reveal the deepest local attack. We inspect sensitive dimensions, edges, recesses, and visible defects separately where they matter. The appropriate acceptance method depends on the part, not simply the average number in a trial report.

Investigating an uneven result

If a surface is streaked, we review cleaning, handling marks, rack orientation, bath exposure, and transfer to rinsing. We also check material differences and later finishing stages. An uneven final appearance does not automatically prove that the etching chemical is the only cause.

For unexpectedly heavy removal, we compare actual temperature, treatment time, and bath analysis with the accepted trial. We avoid correcting the problem through appearance alone. The revised condition should satisfy both surface and dimensional requirements before routine production resumes.

6. Applications We Assess for Liquid Alkaline Etching

Architectural aluminum profiles

For window, door, curtain-wall, and interior profiles, we consider visible surface consistency over the full length. The starting extrusion, cleaning, etching, desmutting, anodizing, and coloring can all influence the completed appearance. We evaluate adjacent pieces together where visual matching matters.

Furniture and decorative hardware

Handles, trims, frames, and fittings may need a controlled matte appearance before the next finish. We check whether treatment preserves edges, fixing features, and the intended design. Recesses and curved surfaces should be represented in the trial rather than replaced by an easy flat sample.

Automotive aluminum components

We assess applications where controlled surface preparation fits the customer's specified process. Alloy, machining history, dimensional sensitivity, and the next coating or treatment determine suitability. A successful decorative trial does not establish approval for every automotive or bonding requirement.

Electrical, electronic, and appliance parts

Panels, covers, and housings may require a prepared aluminum surface before anodizing or another compatible finish. We consider protected areas, retained liquid, and mixed-material assemblies. The grade must be assessed for the actual component and cleanliness requirement.

For all these industries, we separate a decorative target from a functional one. An etched surface intended for appearance may need different evidence from a surface prepared for coating adhesion. The application name starts the discussion; the part specification completes it.

7. Our Manufacturing Support and Order Arrangements

At Jianli Huaao Technology Co., Ltd., we develop, produce, and supply chemical additives for aluminum profile surface treatment. We have worked in this field for more than two decades, combining research with technical consulting. Our base is in the Huazhong Ecological Aluminum Demonstration Industrial Park in Jianli, Hubei.

Our production facilities, testing instruments, and quality assurance system support this work. We also serve as a standing council member of the China Non-Ferrous Metals Processing Industry Association. We connect that industry experience with grade-specific documentation and application evaluation.

Our product range covers degreasing, chemical sandblasting, polishing, alkaline etching, electrolytic coloring, sealing, and chromium-free passivation. This broader scope helps us discuss how a liquid alkaline etching stage fits the surrounding process rather than treat it as an isolated tank.

From formulation to delivery checks

We begin by defining the supplied grade and its intended application. Product release requirements should identify the relevant properties and test methods. Working-bath conditions belong in separate operating instructions so that a concentrate specification is not confused with a production-bath target.

Raw-material identification, formulation control, mixing, inspection, and packaging are linked manufacturing requirements. We discuss which checks apply to the selected product and order. A statement about consistent quality should be supported by identifiable criteria rather than an unspecified promise.

The delivery agreement should identify grade, quantity, batch information, inspection requirements, and accompanying documents. Technical instructions and the safety data sheet must correspond to the supplied material. Additional reports or document requirements should be agreed before order confirmation.

Schedule and payment

We confirm production timing according to formulation, quantity, and inspection work. An order requiring application evaluation needs a different plan from an established grade with an agreed specification. We state the confirmed schedule in the order documents.

Payment terms may include T/T or L/C, subject to agreement. The contract should identify the payment stages and required documents. We do not apply an assumed deposit percentage or credit period to every customer.

Packaging and shipping

For the liquid product, we select suitable sealed drums or intermediate bulk containers according to chemical compatibility, safety information, and shipment requirements. The actual package size, closures, and handling arrangements are confirmed for the selected grade.

Sea freight and road transport can be assessed for suitable orders. Air shipment depends on product classification, approved packaging, carrier requirements, and the route. We confirm these arrangements from the actual material information and agreed delivery terms.

Storage conditions and shelf life must come from the grade's documentation. Liquid form does not establish unrestricted storage temperature, freeze resistance, or indefinite stability. We confirm the relevant instructions with the product information.

8. Alkali etching agent(liquid) FAQ

Is this product a complete bath or an additive?

We confirm that for the selected grade before providing operating instructions. A formulated etchant and an additive used with separate alkali have different make-up and control requirements. The phrase Liquid alkali etching agent alone does not establish which arrangement applies.

Can we use one setting for every aluminum alloy?

No. We evaluate the actual alloy, surface condition, part geometry, and required finish. Settings accepted for a profile should not automatically be applied to a casting or a dimensionally sensitive machined part. Representative trials establish the appropriate working conditions.

Will stronger alkali always create a better matte finish?

No. Surface development depends on several connected conditions, and stronger treatment can increase unwanted removal. We compare bath analysis, temperature, time, appearance, and relevant dimensions against the accepted trial instead of treating chemical strength as a single quality measure.

Can the etching stage replace degreasing and desmutting?

Only where the selected process has been validated for those functions. Some products combine cleaning and etching, while other applications require separate cleaning. A subsequent desmutting stage may still be needed before anodizing, depending on the alloy and formulation.

Does a stable pH prove that the bath is ready to use?

No. We follow the selected grade's analytical method and assess the other relevant conditions. Available alkali, dissolved aluminum, additive control, temperature, and surface results may provide different information. A pH reading cannot replace that agreed control plan.

How do we assess a claim of longer bath life?

We define the operating conditions, output, replenishment, maintenance, and end-of-service criteria for the comparison. Bath age alone is not enough. A useful assessment also considers accepted production, surface quality, consumption, and the reason a bath was renewed.

Send us your alloy, target surface, existing process sequence, and production conditions so we can discuss a suitable Alkali etching agent(liquid) grade and a practical evaluation plan.

在线留言

请填写有效的邮箱地址
验证码 不能为空

相关产品

chat

×

本网站使用 cookie 来确保您在我们的网站上获得最佳体验。

接受 拒绝