登录 | 注册
产品中心
首页 > 产品中心 > Aluminum and aluminum alloy Surface handle series > Acidity degrease agent

Acidity degrease agent

1.Character: 

    This product is colorless or light yellow transparent liquid, mild acid, with adding  this goods in the acid bath  can remove the stain  and oil on the  surface of aluminum effectively, cleaning the metal surface, degreasing effectively in Bath liquid , long life, low cost, no pollution in the follow-up tank.

2.Usage: 

   Applied to aluminum-based and other aluminum and aluminum alloy products in dealing with oil .

3.Parameters: 

      H2SO4          50-60g / L

      HA—11         10-15g / L

     Temperature      20-35 ℃

     Time            2-5min

4.Consumption: 

      Consumption depends on the stain or oil on the aluminum, take a ton of aluminum for example, consumption is 3-5kg.

5.Packaging :

     25kg per plastic tin.


A thin oil film can be hard to see on aluminum, yet it can interfere with the finish applied later. We supply Aluminum surface treatment additives with that practical problem in mind. Our Acidity degrease agent product category focuses on preparing oily aluminum surfaces for the next approved process. We help you assess the alloy, contamination, cleaning method, and finishing requirements before choosing a suitable grade.

1. What Our Acidity degrease agent Is Used For

Aluminum parts collect more than visible dirt. Extruded profiles may carry handling marks and processing lubricants. Machined components can retain cutting fluids around holes and recesses. Decorative parts may arrive with polishing residue. Before we discuss the cleaner, we need to understand what is actually sitting on the metal.

An acidic degreasing agent is a formulated cleaner for removing suitable oils and other contamination under defined conditions. Depending on its chemistry, it may also affect surface oxides. That second function needs careful checking: removing oil, removing oxide, and deliberately changing surface texture are different jobs.

We use the product name Acidity degrease agent here, while the more common technical names are Acid degreasing agent and acidic aluminum cleaner. The useful question is the same whichever name you use: can the selected grade clean your parts without creating an unwanted change in their appearance or dimensions?

We look at cleanliness as preparation for a specific next step. Aluminum going into anodizing may have different requirements from a component entering a conversion coating line. A bright decorative surface may also need tighter appearance control than a part that will receive an opaque finish.

Good cleaning gives later baths more consistent access to the surface. It cannot correct every problem further down the line. Uneven anodizing, poor coating adhesion, or color variation may also involve rinsing, alloy differences, surface texture, electrical contact, or finishing conditions.

For that reason, we start product discussions with the alloy designation, part shape, lubricant or residue, existing process sequence, and required finish. Photographs help explain the problem, but actual production samples are more useful when we need to distinguish an oil film from staining or surface damage.

Our aim is to define a workable cleaning stage that your operators can check and maintain. We do not describe an acid degreaser for aluminum as suitable for every alloy, every oil, or every production line without a relevant trial.

2. How Acidic Degreasing Works and Where It Fits

Cleaning needs contact. If the bath cannot reach the dirty area, its chemistry cannot do much there. We therefore look at part orientation, trapped air, rack spacing, spray coverage, and solution movement alongside the chemical formulation.

Surfactants are cleaning ingredients that help liquid spread and interact with oily contamination. Think of them as helping the working solution reach an area that water alone may struggle to wet. The complete formulation determines whether the removed oil remains dispersed in the bath or separates in a way the equipment can manage.

The acid component can assist with particular mineral or oxide contamination, depending on the formulation. However, acid strength alone does not describe degreasing performance. Oil removal also depends on the surfactant package, the soil itself, temperature, contact time, and physical access.

We keep cleaning and etching separate in the process discussion. Etching intentionally removes material to create a controlled surface condition. A cleaning stage may permit limited surface attack, but that does not make uncontrolled dulling or pitting acceptable. We agree the surface requirement before evaluating the result.

Comparing cleaning and surface preparation routes

RouteMain Published FunctionWhat We Check Before Selection
Mildly acidic process cleanerRemoval of oil before conversion coating in suitable applications.Alloy response, oil removal, surface change, and rinse compatibility.
Mildly alkaline process cleanerRemoval of oil before conversion coating in suitable applications.Soil loading, formulation compatibility, rinsing, and equipment conditions.
Acid deoxidizing or micro-etching stageOxide removal or controlled surface preparation; prior cleaning may be required.Whether degreasing is a separate stage and how surface removal is controlled.

Sources: Chemetall, Gardoclean technology overview; Henkel, BONDERITE C-IC 1095 Technical Data Sheet, May 2025. Selection checks are our engineering interpretation. These route descriptions do not establish the performance of a Huaao grade.

This comparison helps avoid a common shortcut: replacing a complete cleaning stage with an acid treatment because both liquids appear to brighten the metal. A brighter surface can still carry contamination. We judge the chosen sequence by cleanliness and the finished result, with surface appearance treated as a separate observation.

3. The Product Features We Focus On

Cleaning that matches the actual residue

We begin with the soil rather than a broad claim about cleaning power. A fresh machining fluid, an aged oily film, and a wax-rich polishing compound can behave differently. A suitable aluminum degreasing agent must be evaluated against the contamination your parts actually carry, including the difficult areas.

Where polishing wax or heavy residue is involved, we also assess whether a separate de-waxing product or preliminary cleaning step is needed. Our wider surface treatment range includes aluminum alloy and cast aluminum degreasing and de-waxing products, which allows us to discuss these tasks separately.

Control over unwanted surface change

We want the cleaning result to fit the next operation. For a decorative profile, this includes checking for streaks, patchiness, or loss of the intended appearance. For a machined part, we also consider features where unnecessary metal removal could matter. The acceptable surface condition belongs in the agreed trial criteria.

A cleaning method that suits the equipment

Immersion and spray cleaning place different demands on a formulation. A product that performs well in a quiet laboratory beaker still needs validation in a spray system with pumps, nozzles, and moving parts. We confirm the proposed method rather than treating all application methods as interchangeable.

Foam behavior, circulation, oil management, and drainage matter because they affect daily operation. We do not assume a grade is low-foaming or suitable for spray cleaning unless its technical information and a relevant trial support that use.

Instructions operators can use

A workable product needs more than a name and a mixing ratio. We want the operating instructions to explain the agreed concentration, temperature, treatment time, rinsing sequence, analytical checks, and replenishment method. Operators should also know which changes call for investigation instead of another chemical addition.

We assess technical advantages against your current process. Reduced heating, lower consumption, longer bath service, or fewer rejected parts can be useful outcomes, but each requires a measured comparison. We do not assign savings or bath-life figures to an untested application.

4. Choosing Working Conditions Without Guesswork

When you ask us about the working concentration of an Acidity degrease agent, we first ask which grade and which job. A concentration taken from another cleaner is not a reliable starting specification. Products can differ in active ingredients, supplied strength, application method, and intended surface effect.

The same applies to temperature and treatment time. Raising either may change cleaning performance, but it may also change surface attack or affect the production sequence. We establish a working window around the required result and the limits of the selected product.

Published examples showing why operating windows differ

The figures below are external reference data for the named products. They are not Huaao operating instructions, a performance ranking, or a claim that our product uses the same formulation.

Published Reference ProductProduct FormPublished ConcentrationPublished TemperaturePublished Treatment Time
DIPSOL AL-50 acidic aluminum cleanerLiquid20–50 mL/L20–50°C2–10 minutes
BONDERITE C-IC A LK acidic aluminum degreaserLiquid1–4%; percentage basis not stated in the cited brochure30–50°CNot stated in the cited brochure

Sources: DIPSOL Chemicals, AL-50 official product information; Henkel Japan, Anodizing Agents product brochure, July 2024, page 2. Henkel identifies its brochure values as reference data rather than specification limits. Confirm current documents before using either reference product.

We have preserved the concentration units as published. We do not assume that an unspecified percentage uses the same basis as a volume-per-volume measurement. These examples show why the selected grade needs its own current technical data sheet.

Building a practical trial

We begin with representative parts, including normal production contamination and the areas that are hardest to clean. A trial on an unusually clean sample can make an unsuitable process look convincing. Record how the samples were stored and whether residues have dried before treatment.

We then define what the trial must establish: oil removal, acceptable appearance, compatibility with the alloy, rinsing behavior, and a satisfactory result after the intended finish. The person reviewing the trial should know these criteria before seeing the samples.

During the trial, we record the selected grade, bath preparation, operating conditions, part loading, and observations. We change conditions in a controlled way so that an improvement can be connected to its cause. A successful result should be repeated before moving to routine production.

Rinsing remains part of the trial. Residual cleaner carried into the next bath can create a separate process problem even when the oil has been removed. We check drainage, part orientation, and the agreed rinse condition alongside the cleaning result.

5. Checking Cleanliness and Keeping the Bath Useful

We do not judge cleanliness by brightness alone. A shiny part can retain an oily film, while a clean matte surface may be ready for its next treatment. We choose checks that answer the actual process question instead of relying on appearance as a substitute.

The water-break test is one useful screening method for hydrophobic contamination, meaning contamination that resists wetting by water. ASTM F22-21 describes it as a qualitative check rather than a measurement of how much contamination remains. We use that distinction when discussing acceptance: a screening result cannot supply a numerical residue level.

Test suitability also matters. ASTM F22-21 identifies limitations involving rough or porous surfaces, visibility, and structures that can trap water. Where those limitations apply, we choose a suitable alternative assessment rather than forcing the same test onto every component.

Comparing numerical wetting observations

Contact angle measurement offers a different kind of information. It measures the angle formed where a liquid drop meets a surface. The following published water-wetting classifications provide context for interpreting that observation.

Advancing Water Contact AnglePublished Wetting ClassificationHow We Use the Information
Below 45°HydrophilicEvidence of water wetting under the test conditions.
45–90°Intermediate wetting behaviorA comparison point for a controlled cleaning trial.
Above 90°HydrophobicA reason to investigate the surface condition and possible contamination.

Source: ASTM International, ASTM D7334-08(2022), Significance and Use, section 5.5. These are wetting classifications, not universal acceptance limits for our cleaner, coating adhesion, or every aluminum surface. The application notes are our interpretation.

We compare measurements made under consistent conditions. The test liquid, surface condition, sampling location, and time after cleaning should be recorded. A measurement on one small area does not establish the condition of every recess or the whole production load.

The final finish also needs checking. A cleaner can pass a surface screening test while a separate problem remains in conversion coating, anodizing, coloring, or curing. We therefore include the relevant downstream result in product qualification, using the customer's agreed method.

Bath control during production

A working bath changes as it receives oil, metal-related reaction products, and carryover from earlier stages. We follow the selected grade's analytical method and replenishment instructions. For some acid processes, a specified acid titration is more useful than judging bath strength from appearance or a pH reading alone.

When cleaning deteriorates, we also inspect temperature measurement, spray coverage, circulation, loading, and rinse condition. Adding more product without identifying the cause can increase consumption while leaving the original problem in place. Our preferred troubleshooting sequence checks the process as well as the chemical reading.

6. Where We Evaluate This Aluminum Degreasing Agent

Architectural aluminum profiles

For profiles used in windows, doors, curtain walls, and interior systems, we consider the complete decorative finish. Cleaning needs to address handling and processing contamination without introducing inconsistent surface change. Long parts also make drainage, rack orientation, and uniform exposure important trial points.

We assess an acid degreasing agent for aluminum profiles as part of the intended anodizing or coating route. The cleaner should support that route without being asked to replace a separate etching, neutralizing, or conversion step that the process still requires.

Automotive and machined aluminum components

Machined parts bring different geometry and soils. Holes, pockets, and narrow passages can hold fluid or trap air. We evaluate an aluminum parts cleaner using the actual alloy, machining residue, and access conditions. Castings need their own review because their composition and surface can differ from wrought profiles.

For automotive work, cleaning acceptance must connect to the customer's next operation and specification. We do not infer approval for bonding, coating, or another demanding application from a general degreasing demonstration.

Electrical, electronic, and appliance parts

Housings, covers, and other aluminum parts may need cleaning before a decorative or protective finish. We pay attention to retained liquid, mixed-material assemblies, and residues that could affect the next stage. Suitability for electronics-related work must be confirmed for the actual component and cleanliness requirement.

Furniture and decorative hardware

On decorative parts, polishing residue and appearance often need to be evaluated together. We distinguish an oil-removal task from a heavy de-waxing task and check whether the selected sequence preserves the required finish. A single successful test on a flat sample does not cover every recess or polished detail.

Across these industries, our selection method stays practical: identify the material, identify the residue, define the next operation, and test representative parts. The industry name helps us understand the application, but it does not replace those details.

7. Why Work With Huaao and How We Plan Delivery

At Jianli Huaao Technology Co., Ltd., we develop, produce, and supply chemical additives for aluminum profile surface treatment. We have worked in this field for more than two decades, combining product development with technical consulting. Our base is in the Huazhong Ecological Aluminum Demonstration Industrial Park in Jianli, Hubei.

Our production facilities, testing instruments, and quality assurance system support this work. We also serve as a standing council member of the China Non-Ferrous Metals Processing Industry Association. We treat that industry involvement as background to our work, while product suitability still needs evidence from the selected grade and application.

Our range covers chemical sandblasting, polishing, alkaline etching, electrolytic coloring, sealing, degreasing, de-waxing, and chromium-free passivation products. This wider process knowledge helps us discuss what comes before and after the cleaning stage. It does not mean every product in the range can be substituted for another.

From product definition to batch release

We start the supply discussion by defining the application and the grade to be evaluated. The agreed product specification should identify the relevant properties and their test methods. Depending on the formulation, these may include appearance, chemical control values, or other measurable characteristics stated in its documentation.

Formulation control, raw-material identification, controlled mixing, batch inspection, and packaging are connected parts of chemical manufacturing. We discuss the required release checks with you rather than presenting an unspecific statement that every batch has been tested for everything.

The delivery agreement should identify the grade, quantity, batch information, agreed inspection requirements, and accompanying documents. Product-specific technical instructions and safety information need to match the supplied material. A reference table for another manufacturer's cleaner cannot serve as our batch specification.

Production schedule and payment

We confirm the production schedule according to the formulation, order quantity, and required inspection work. A grade that still needs application evaluation follows a different schedule from an order with an agreed specification. We state the confirmed timing in the order rather than promise a fixed period for every request.

Payment terms can be discussed using T/T or L/C, subject to agreement. The contract should state the payment stages, required documents, and other accepted conditions. We do not apply an assumed deposit percentage or credit period to every customer.

Packaging and transportation

We select packaging according to the product form, chemical compatibility, safety data sheet, and transport requirements. Suitable sealed drums or intermediate bulk containers may be considered for liquids; moisture-resistant packaging may be relevant to powder grades. The actual package and quantity are confirmed for the supplied product.

Sea freight and road transport can be assessed for suitable orders. Air shipment is considered only where the product classification, packaging, carrier rules, and route allow it. We confirm transport arrangements from the actual material information instead of treating all aluminum pretreatment chemicals as ordinary cargo.

8. Acidity degrease agent FAQ

Can we use this product on every aluminum alloy?

No. We confirm compatibility for the selected grade and actual alloy. Wrought profiles, machined parts, and castings can respond differently to chemical treatment. A representative trial should check cleaning, surface appearance, and any relevant dimensional requirements before routine production.

Can acidic degreasing replace alkaline cleaning?

Sometimes, but we do not make that substitution from the product category alone. We compare the residue, alloy response, existing equipment, rinse sequence, and final finish. Some applications need a different cleaner or a separate preliminary stage to handle heavy oil or polishing wax.

What concentration and temperature should we use?

Use the current technical instructions for the selected Huaao grade and the conditions confirmed by your application trial. The external figures in this article illustrate differences between published products. They are not operating settings for our Acidity degrease agent.

How do we know whether oil has been removed?

We agree a suitable cleanliness check and verify the downstream result. Water-break testing can screen for hydrophobic films where applicable, while contact angle measurement provides a different wetting observation. Neither method alone identifies every contaminant or guarantees the performance of the finished coating.

Does a lower bath pH mean better cleaning?

No. Bath acidity is only part of the formulation and operating condition. Surfactant performance, oil loading, temperature, contact time, and access to the dirty area also matter. We follow the grade-specific control method and investigate process changes before making adjustments.

Can we call the product environmentally friendly?

We use specific, supported descriptions for the selected formulation instead of treating the whole product family as having one environmental profile. Any claim about restricted substances, discharge, transport, or disposal needs relevant documentation. An acidic cleaner still requires handling and waste management appropriate to its actual composition.

Send us your alloy, contamination details, cleaning equipment, and intended finish so we can discuss a suitable Acidity degrease agent grade and a practical trial plan.

在线留言

请填写有效的邮箱地址
验证码 不能为空

相关产品

暂无搜索结果!
chat

×

本网站使用 cookie 来确保您在我们的网站上获得最佳体验。

接受 拒绝